Playing a squealing reel of Sony PR-150 tape using D5 (Decamethylcyclopentasiloxane)

Today I worked on a batch of five Sony PR-150 7-inch reels recorded at 3.75 in/s in one direction, two-track mono. One of the five reels showed marked shedding during fast-wind/rewind (to get the original reel as takeup and to check the tape pack). Four of the five reels played fine. This one squealed horribly. I ran the tape up and back over the dispenser and then fixed it in position for running the tape over it during the playback session. Once again, D5, Decamethylcyclopentasiloxane, CAS Number 541-02-6 comes to the rescue. The lovely thing about D5 is that it evaporates.

APR-5003 with D5 dispenser

Is this better than cold playback? I don’t honestly know. Both work. This is easier if there is no reel machine standing by for cold playback (which there was not today). I keep a Nakamichi MR-1 in the refrigerator so it is ready to go when I need it. The Studer A810 I put in the fridge did not like it. The capstan motor seized up AND the heat output overwhelmed the refrigerator’s capacity to cool. I suspect the APR would also overwhelm the refrigerator’s capacity. Also, it is much easier to lubricate a reel than a cassette.