We have been wondering just how far we can push the Sony APR-5000 capstan servo system, so we ran a few tests using an external oscillator feeding the reference port. Unlike Ampex, Otari, and Studer machines which use an external reference of 9,600 Hz; the Sony machines use an external reference of 19,200 Hz.

We found that the APR-5000s did not run reliably below 1.88 in/s — and that is achievable with a -50% varispeed already. It didn’t matter what the base speed was.

The APR-16 (cousin of the APR-24) did not run reliably below 3.75 in/s. But the good news was that we could bring 15 in/s down to 3.75 in/s using the external reference source. We were also able to run the APR-16 at 60 in/s, but takeup tension was a bit low.