A simple, 5-sided box solves two problems:
–Protection of the Studer A80
–Providing more work surface
Year: 2007
Success with squealing Shamrock 031 tape
I spent days trying to get Shamrock 031 to play without much success. Since this is an Ampex factory budget brand (probably non-spec premium tape) I thought that it might be suffering from Sticky Shed Syndrome. I baked it for 12 hours and it still squealed. I then tried my usually successful cold playing technique and it still squealed. Cold playing has worked successfully with 3M 175 and Sony PR-150.
I was getting rather frustrated and since it was a four-track tape and one of the techniques that is supposed to reduce squeal is to play the tape faster, I dragged out my Racal Store 4DS instrumentation recorder which has a 75,000 Hz bandwidth at 15 in/s and played it at 15 in/s and digitized it at 88,200 samples per second. After slowing it down 4x and ending up with a 10 kHz bandwidth (which I subsequently truncated to 5 kHz since there was no useful information above that, but lots of noise–same as the non-squealing portion of the real-time transfers on a Studer A810).
Seeing the tracks II — An improved magnetic viewing system
I first wrote about seeing the tracks here in March of 2006. While these solutions work, the Plastiform viewer needs to be kept in a humidor and the Kyread spray is a bit of mess to use and the results are variable. One result of the Kyread treatment can be seen here (please wait for the pictures to load, it’s a big page).
Here is what appears to be a vastly improved solution:
Soft Binder Syndrome and Sticky Shed Syndrome
For a current list of degrading analog tapes, click here.
For several years, we have been discussing the differences between Sticky Shed Syndrome (SSS) and Loss of Lubricant (LoL). It appears from my latest research (presented at the 2006 Audio Engineering Society’s 121st Convention in San Francisco in October) that LoL does not really factor into the equation for most tapes and that an overarching failure mode is Soft Binder Syndrome, or SBS. Sticky Shed Syndrome appears to be a subset of SBS.
Securing the end of a tape to the reel
I receive many tapes that use very creative methods of securing the end of tapes to reels. Some don’t do it at all. Most 1/4-inch tapes are secured as shown below. Sadly, the superior Zebra tape is no longer available. This is the traditional crepe-paper type of tape sold for the application. The picture below should explain all.
Cross-point screws take two: JIS vs. PoziDriv
I received the following in an email from a person only identified as Ross. I thank him. He sent me the following in reference to this post. concerning Philips and PoziDriv screws as used on Nakamichi Dragons and other Japanese equipment. I, too, have a set of Hozen drivers which I obtained from www.escience.ca
How to play 4-track 1.875 in/s tapes…
I received a query from a gentleman in Europe about 1.875 in/s 4-track tapes. He was frustrated in finding a good machine for transferring them. Apparently, they have many of these tapes. Here are my suggestions.
Perhaps the easiest answer is to find a Studer-Revox C274 with low speed options. They were made.
Two other options.
Can I destroy my originals after I digitize them?
Jill Hurst-Wahl in her excellent blog “Digitization 101” asks this question and provides some good answers with reasons. You can read it here.
Playback of NAB 2-track tapes on a DIN Stereo (Butterfly) head
I received a query from Sweden today asking
I have a Studer machine with butterfly heads with which I’d like to reproduce
tapes recorded with normal two track heads. Theoretically, how much more noise,
in dB, would I get from playing the “empty” part of the tape?
Let’s look at the assumptions.
Tape speed, track width, frequency response, and dynamic range
There are complex interactions between tape speed, track width, frequency response, and dynamic range. This article is an attempt to summarize the major influences.
RCA “Sound Tape” cartridge and 1/4-track reel introduction dates
David Dintenfass kindly sent me an article from the October 1959 issue of Popular Electronics which says, in part, that RCA plans to have 65 titles in the stores in their new cartridges by Christmas 1959. Other manufacturers were shown to be making compatible players.